Julian‑Gregorian‑Dee Date Calculator

Windows software to convert between Julian, Gregorian, Dee and Dee‑Cecil calendar dates, and to calculate exact dates and times of vernal equinoxes

Julian‑Gregorian‑Dee Date Calculator allows:

• conversion of dates in four calendars: Julian, Gregorian, Dee and Dee‑Cecil
• user-preferred year designators: AD, BC, CE and BCE
• user-preferred date input format: popular or ISO 8601 with astronomical year numbering
• identification of calendar by combination of month,day,year with a day‑of‑week
• addition/subtraction of days, weeks, months and years to a given input date
• calculation of dates and times of vernal equinoxes for years 1 through 4000 CE in the Gregorian and Dee‑(Cecil) calendars.

For an explanation of the Dee and the Dee‑Cecil Calendars see The Dee‑Cecil Calendar and its Date Conversion Algorithms.

User Manual

Astronomical Year Numbering

In the Julian and Gregorian Calendars years prior to the year 1 are numbered by counting backwards from that year and adding a suffix (a.k.a. a year designator) to distinguish years prior to the year 1 from years following the year 1, e.g., 1 B.C., 2 B.C., and so on. Many astronomers and calendrical scientists prefer to use a system of numbering years prior to the year 1 using zero and negative numbers: ... -2, -1, 0, 1, ...  Hence we have the following correspondences:

 Traditional Christian "Religiously neutral""Politically correct" Astronomicalsystem 3 B.C. 3 BCE -2 CE 2 B.C. 2 BCE -1 CE 1 B.C. 1 BCE 0 CE 1 A.D. 1 CE 1 CE 2 A.D. 2 CE 2 CE

"CE" is an abbreviation for "Common Era" (not for "Christian Era"). The suffixes "CE" and "BCE" ("Before Common Era") in the "religiously neutral" system simply replace the traditional Christian suffixes "A.D." ("Anno Domini") and "B.C." ("Before Christ"), so the "religiously neutral" system of year numbering is no different — except for the cosmetic year designator changes — from that of the proleptic Gregorian Calendar (the Gregorian Calendar projected back prior to its start on October 15, 1582).

A calendar using the astronomical system numbers years in a fundamentally different way from the traditional Gregorian Calendar. Dates with years so numbered should have a suffix to distinguish them from dates with years numbered in some other way. In practice, however, "CE" is used both (a) for years from the year 1 onwards in the proleptic Gregorian Calendar in its "religiously neutral" form and (b) for all years (both positive and negative) in the proleptic Gregorian Calendar in the form which uses the astronomical system of year numbering.

The astronomical year numbering system may also be used with calendars other than the proleptic Gregorian Calendar, provided some suffix is used to identify the calendar. Thus, e.g., we have "0 JC" for the year in the Julian Calendar (with astronomical year numbering) which preceded the year "1 JC".

The term "Common Era Calendar" is used in all articles on this website to mean that calendar which has the same structure (days, months, years) as the proleptic Gregorian Calendar and in which years are numbered according to the astronomical system. Dates in this calendar are always designated "CE".

Date Conversion

There are two formats for the input date: The commonly used month,day,year format (e.g., December 21, 2012) and the ISO 8601 year‑month‑day format (e.g. 2012‑12‑21 CE) with astronomical year numbering. When the latter format is selected the date August 11, 3114 BCE (Gregorian) would be specified as follows:

For the month,day,year format a date may have any of four year designators: AD, BC, CE and BCE (as explained above).

The Calculate button is enabled only after an input date has been fully specified (including the calendar in which it is a date). Clicking on this button then displays the input date in all three calendars (Gregorian, Julian and either Dee or Dee‑Cecil) and in both formats (as shown in the screenshot above), plus the Julian day number and the day of the week.

Identifying the Calendar by the Day of the Week

When reading dates in historical documents of the 17th and 18th Centuries it is often not clear whether they are dates in the Julian Calendar ("Old Style") or in the Gregorian Calendar ("New Style"). If, however, the date is accompanied by the day of the week (e.g., "We departed on October 15th soon after Sunday service ...") then this program can be used to identify the calendar. To do this, specify the date as in:

then click on the Calculate button. If the date occurred on the given day of the week in either of the Gregorian or the Julian Calendars then it will displayed (with that calendar shown in boldface), as in:

When an input date is specified in this way the arithmetical function and the date sequence function are not available. After the calendar has been identified the date can be specified with the calendar, and the arithmetical function and the date sequence function then become available again.

If an input date is specified using a day of the week then the result of clicking on Calculate may be that the date does not occur on that day of the week in either calendar. It is also possible that the date occurs on that day of the week in both calendars. In this case the output dates will be displayed with the Julian Calendar date highlighted.

There is no date with years in the range 1580‑2080 which corresponds to the same day of the week in both calendars. The next date which is on the same day of the week in both calendars is 2100‑03‑01, which is a Monday in both calendars. This situation will continue until 2200‑02‑28, which is a Friday in both calendars. 2200‑02‑29 JC is a Saturday, but there is no 2200‑02‑29 CE. The date following 2200‑02‑28 CE is 2200‑03‑01 CE, which is a Saturday, whereas 2200‑03‑01 JC is a Sunday.

Addition and Subtraction of Days etc.

After an input date has been completely specified you can specify a number of years, months, weeks and days to be added or subtracted from it. Clicking on the Calculate button then displays the result of adding or subtracting the specified periods to or from the input date. Years are added/subtracted first, then months, then weeks, then days. (This function is not enabled in the trial version; to use it the software must first be activated.) If the result would be an invalid date in a particular calendar (e.g., adding 1 month to 2011‑01‑30 CE) then that date is decremented by one day until a valid date is reached (in this example, 2011‑02‑28 CE).

Date Sequence

If the input date is fully specifed then the Date Sequence button is enabled. This allows display of a sequence of dates, beginning with the input date, for up to 800 days, for the Common Era Calendar and the corresponding dates in the Dee, or Dee‑Cecil, Calendar. This is mainly so as to observe how the CE dates are correlated with the D and DC dates.

An arrow indicates where the CE and Dee(‑Cecil) dates begin or cease to accord with each other (or in other words, when they get in or out of sync). In the example above, 2016‑03‑01 DC follows 2016‑02‑28 DC because 2016 is not a leap year in the Dee‑Cecil Calendar.

Vernal Equinoxes

This function is available only after the software has been activated.

If the input date is fully specifed then the Vernal equinoxes button is enabled. This allows display of the dates and times of vernal equinoxes, beginning with the year of the input date, for up to 800 years, for the Gregorian Calendar and for the Dee (or Dee‑Cecil) Calendar, using either apparent solar time or mean solar time. The dates/times of the vernal equinoxes in the Dee(‑Cecil) Calendar depend on the specification of longitude (in degrees and minutes west of the Greenwich meridian). A value of between 70 degrees and 79 degrees 59 minutes can be selected (the longitude of Washington DC is 77 degrees 2 minutes west). Here is a sample result:

The output shown above results from getting vernal equinox times first using mean solar time (marked by m) and then using apparent solar time (marked by a). The numbers 1, 2, 3, etc., at right show the position (1‑33) of the year in the 33‑year cycle. A leap year in that cycle is marked by an asterisk.

When mean solar time is selected the times shown are (i) GMT for the Gregorian Calendar and (ii) the mean solar time at the specified longitude for the Dee(‑Cecil) Calendar.

When apparent solar time is selected the times shown are (i) apparent solar time at Greenwich for the Gregorian Calendar and (ii) apparent solar time at the specified longitude for the Dee(‑Cecil) Calendar.

The Dee Calendar was proposed as a new calendar by the Elizabethan scholar John Dee about 1580, when mean solar time as we know it did not yet exist (it had to await the invention of accurate clocks). Dee calculated midnight as halfway between two noons (according to a sundial). But noon in apparent solar (i.e., sundial) time may differ by up to 16 minutes from noon in mean solar (i.e. clock) time, with the difference varying with the time of year (see The equation of time). At the vernal equinox the difference between apparent solar time and mean solar time is close to 8 minutes. Thus to obtain the times that Dee would have obtained in his observations and calculations it is necessary to select apparent solar time, which results from subtracting 8 minutes from the mean solar time for the given longitude. This produces the a times shown above for the vernal equinox in the Dee(‑Cecil) Calendar.

An arrow at the end of a line in the display indicates a year in which the vernal equinox does not occur on the target date: March 21 in the Dee Calendar, March 20 in the Dee‑Cecil Calendar. For an explanation of why these dates are "target dates" see John Dee's Calendar and God's Longitude.

Trial version: A copy of the Julian-Gregorian-Dee Date Calculator software is available for free download from this website for the purpose of evaluation. Click on the following link for further information: